R3G450AY8601

R3G450-AY86-01

EC centrifugal fan - RadiPac

Motor: M3G112-IA

Technical description
Weight 17 kg
Motor size 112
Size 450 mm
Rotor surface Painted black
Electronics housing material Die-cast aluminum
Impeller material Sheet aluminum
Number of blades 7
Direction of rotation Clockwise, viewed toward rotor
Degree of protection IP54
Insulation class "B"
Moisture (F) / Environmental (H) protection class H1
Max. permitted ambient temp. for motor (transport/storage) +80 °C
Min. permitted ambient temp. for motor (transport/storage) -40 °C
Installation position Shaft horizontal or rotor on bottom; rotor on top on request
Condensation drainage holes On rotor side
Mode S1
Motor bearing Ball bearing
Technical features - Output 10 VDC, max. 10 mA - Output 20 VDC, max. 50 mA - Output for slave 0-10 V - Input for sensor 0-10 V or 4-20 mA - External 24 V input (parameter setting) - External release input - Alarm relay - Integrated PID controller - Power limiter - Motor current limitation - PFC, passive - RS-485 MODBUS-RTU - Soft start - EEPROM write cycles: 100,000 maximum - Control input 0-10 VDC / PWM - Control interface with SELV potential safely disconnected from the mains - Thermal overload protection for electronics/motor - Line undervoltage / phase failure detection
EMC immunity to interference According to EN 61000-6-2
EMC interference emission According to EN 61000-6-3 (household environment), except EN 61000-3-2 for professionally used equipment with a total rated power greater than 1 kW
Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) <= 3,5 mA
Electrical hookup Terminal box
Motor protection Thermal overload protector (TOP) internally connected
Protection class I (with customer connection of protective earth)
Conformity with standards EN 61800-5-1 / CE
Approval UL 1004-7 + 60730-1 / EAC